Make a diaper cake!

Do you know a mom to be? How about making her one of these:

My first diaper cake...I'm so proud of myself!

My first diaper cake...I'm so proud of myself!

And these:

I made this card with Kathy's template, see link below.

I made this card with Kathy's template, see link below.

You can download the printable template or one to cut with SCAL from this post. Thanks again to my friend Kathy for letting me share her template!

To make a diaper cake you will need a package of diapers, 50 or so, usually marked Jumbo. If you are making this for a mom to be use a pack of size 1 diapers, I used a pack of size two because this was for my friend Kristin who had her baby 3 weeks ago! She is adorable BTW! You will also need narrow ribbon cut into 12″ lengths, wide ribbon, rubber bands, a short dowel or chopstick and baby items such as pacifiers, bottles and teething rings. An extra pair of hands are helpful to, my 4 year old twins helped my by rolling the diapers and holding them together as I tied them. Time needed: 1 hour.

Step 1. Roll up each diaper and tie with a narrow ribbon.

Step 2. Grab a bunch of diapers (6 or so) and join them by wrapping a rubber band around them. Add a layer of diaper rolls around that and tie with a wide ribbon (the extra hands come in handy here!) This is how you make the layers of your “cake” make 3 different sizes so they will stack.

Step 3. Place the large layer on a plate (I save the sturdy plastic trays that fruit platters come in for this but you can cut a circle out of cardboard and cover it with foil.) Then place the middle layer on that. Slide a dowel threw the two layers, then place the top layer on so the dowel is in the middle. This keeps it from falling apart. You could use tape but be careful not to use so much it ruins the diapers when it is pulled off!

Tie on the baby things with the loose ribbon poking out here and there from when you tied the diapers together. Done!

My girls had a ball making this and it is sure to come in handy for any new mother! Why not make one today.

This Onsie’s a doozie!

Happy Weekend! My friend Kathy sent me this adorable invite to a friends baby shower and I loved it so much I asked if I could post it on my blog and share the templates…Thanks Kath!

My friend sent me rock Kathy!

My friend sent me rock Kathy!

I have templates that you can print and cut as well as SVG files you can use with your Cricut and SCAL software.

For the Print and cut version click here. This will fit on an 8 1/2″ x 11″ sheet of paper.

For the SVG version click here (onsie front & sleeves) and here (onsie back). I made the SVG version in two parts so that folks with the original cricut, 6″x12″, could cut each piece on a separate mat to size, roughly 5″x7″. To size it up just cut one side then layer the other piece on top and delete the first piece and cut again on a separate sheet of paper.

To make the card cut out the template, cut the front from a lighter shade of card stock for contrast. Embellish then fold back the tabs on the front piece and glue then to the back of the back piece, see photo.

Thanks again Kathy for sharing your work. Until next time happy crafting!

%d bloggers like this: